i have a piccalo snare drum, and i've wanted to replace the lugs and rims with brass counterparts. I can find brass hoops well enough, but the lugs are getting tricky. Does anyone know where to find double ended lugs that are 1 1/16" from hole to hole? or, is there any way to circumvent this problem by drilling new holes into the steel shell?
Thanks!








_________________
6 peice Yamaha Stage Custom Advantage Nouvoeu
Sabian AA's all around
Yamaha hardware except for DW 7000's
Working on a custom piccolo snare (please, i need advice)

are you sure those are the right measurements? i can't find any lugs that would fit that drum...

Go to drummaker.com and check out their lugs, when you click on a lug style they have the hole-to-hole measurements listed.








_________________
www.pjclevenger.com

www.medicinemandrumsaz.com

DML Special: 20% off all drums.

Two wrongs don't make a right, but three rights do make a left!

yes, belive me i've measured it many times. its very frustrating.
and i dont belive drummaker has any of those sizes. i might have to settle for single tension lugs








_________________
6 peice Yamaha Stage Custom Advantage Nouvoeu
Sabian AA's all around
Yamaha hardware except for DW 7000's
Working on a custom piccolo snare (please, i need advice)

Email them about the Bowtie piccolo lug. It may be close if not exact.
If they're 1" instead of 1 1/16th, you can drill the holes a little bigger to make them fit.

Part # 5182








_________________
www.pjclevenger.com

www.medicinemandrumsaz.com

DML Special: 20% off all drums.

Two wrongs don't make a right, but three rights do make a left!

Whats you recommendation on single tension lugs. I heard they can warp the drum.
And are there any with only one hole per lug?








_________________
6 peice Yamaha Stage Custom Advantage Nouvoeu
Sabian AA's all around
Yamaha hardware except for DW 7000's
Working on a custom piccolo snare (please, i need advice)