| Author |
Message |
screamBRYAN

drumming adept
Posts: 96
Joined: 12 Feb 2007
Location: BELVIDERE, NJ
|
 DW hardware or Tama hardware?
They are both affordable, but i have very little cash flow since i am 15, but i need to know, which brand will last me longer? most of the drummers in my school say DW hardware is garbage, but i wouldn't know. most of you would say you never know till you try it for yourself but i'd rather spend money on something i know is good rather than waste it and be unhappy with my purchase. any feedback would be most helpful. thanks guys.
|
| |
Sat Feb 17, 2007 1:52 pm |
 |
m

groove master
Posts: 1238
Joined: 30 Jul 2006
Location: Mobile/ATL/NOLA
|
what specific pieces do you need, because they are not compatible/interchangeable- the sizes of posts, etc are different.
I have some of each in my studio, and both companies make different levels of gear.
If you could narrow it down to a few choices you're considering, it'd help to give an opinion.
So far, at the top of the line both brands have been good to me, no problems to report. But what fits on a Tama tom-holder won't fit on a DW~
_________________ analog missionary
M=yspace
|
| |
Sat Feb 17, 2007 2:22 pm |
 |
screamBRYAN

drumming adept
Posts: 96
Joined: 12 Feb 2007
Location: BELVIDERE, NJ
|
hardware such as:
cymbal stands and hi hat stands
i just wanna know which ones function better cause the wingnuts on my pearl stands come loose quickly especially on my boom stand and leaves my cymbal upside down... grr lol
|
| |
Sat Feb 17, 2007 2:42 pm |
 |
m

groove master
Posts: 1238
Joined: 30 Jul 2006
Location: Mobile/ATL/NOLA
|
well, I've got a Tama and a DW kit in the studio, with each brand's respective hardware, and neither give me problems along those lines. I use Slicknuts for attaching the cymbals, and that can be problematic as the post sizes differ on the stands. But I've never had trouble with them slipping or stripping; but these would be the top-of-the-line models.
One thing that's nice about the DW hardware is the big handles they use instead of smaller wingnuts; they tend to be a little easier to crank on.
Other than that, I think both brands are plenty tough and I'd trust either of them.
_________________ analog missionary
M=yspace
|
| |
Sat Feb 17, 2007 3:45 pm |
 |
screamBRYAN

drumming adept
Posts: 96
Joined: 12 Feb 2007
Location: BELVIDERE, NJ
|
thanks man, i think im going with DW.
|
| |
Sat Feb 17, 2007 3:54 pm |
 |
Scott_Hurford

session drummer
Posts: 564
Joined: 23 Aug 2006
Location: Swansea, Wales
|
DW is the top of the bunch when it comes to hardware quality, but they can be quite expensive.
Tama on the other hand is just as good in my opinion but cheaper, if your on a low budjet, i recommend Tama hardware
_________________ Tama/Zildjian/Remo/Vater
www.myspace.com/scotthurford
|
| |
Sun Feb 18, 2007 6:59 am |
 |
anavrinIV

groove master
Posts: 1587
Joined: 03 Sep 2006
Location: concord, nc
|
tama roadpro is all the stand you need, and its dw rival, the 9000 series, is about twice as expensive and a lot heavier. i have 2 roadpro convertible boom stands and i wouldnt trade them for anything. at one point i had 3 cymbals (18" paiste sig crash, 12" wuhan, 10" aax splash) on one using the boom and 2 gibraltar grabber arms, plus my 2 toms (10x12 and 11x13) on my tama double tom holder and a multiclamp. the stand was perfectly firm with all that weight on it. you can spand all your money on dw stands but at the end of the day my money is best spent on tama.
also note that when i upgrade hardware i basically go all out so anything less than a brands top line is out for me, generally. dw has some lower levels (5000 series) but even that is as much or more than roadpros.
_________________
zen_drummer wrote:Real life doesn't work that way, and one day he's gonna pull a stunt like that and they'll put a cap in him. At that point it won't matter that he was fat in high-school and couldn't get laid.
|
| |
Sun Feb 18, 2007 7:54 am |
 |
screamBRYAN

drumming adept
Posts: 96
Joined: 12 Feb 2007
Location: BELVIDERE, NJ
|
Thanks guys, i'm gonna use DW hardware, but tama pedals are the shit.
_________________ Pearl Drums
Meinl Cymbals
Tama Pedals
DW Hardware
Vater Sticks
Evans Heads
|
| |
Sun Feb 18, 2007 9:33 pm |
 |
Tuthmozis

beginner
Posts: 13
Joined: 04 Jan 2007
Location: Poland
|
 Can You believe it?
Recently I've got me a brand new Iron Cobra Lever Glide hi hat, and few days later the nickel "dandruff" started falling from the top of main pipe.
I'm devastated - cheap chinese crap finish!
_________________ Yamaha Recording Custom shells
Yamaha Maple Custom snare
PAISTE Signature cymbals
VIC FIRTH sticks
|
| |
Mon Feb 19, 2007 3:00 pm |
 |
screamBRYAN

drumming adept
Posts: 96
Joined: 12 Feb 2007
Location: BELVIDERE, NJ
|
every brand has their great stuff, their decent stuff and their bad stuff, you landed the 3rd one i guess
_________________ Pearl Drums
Meinl Cymbals
Tama Pedals
DW Hardware
Vater Sticks
Evans Heads
|
| |
Mon Feb 19, 2007 4:35 pm |
 |
Spydr2000

drumming adept
Posts: 304
Joined: 03 Dec 2006
|
 Re: DW hardware or Tama hardware?
screamBRYAN wrote:They are both affordable, but i have very little cash flow since i am 15, but i need to know, which brand will last me longer? most of the drummers in my school say DW hardware is garbage, but i wouldn't know. most of you would say you never know till you try it for yourself but i'd rather spend money on something i know is good rather than waste it and be unhappy with my purchase. any feedback would be most helpful. thanks guys.
I just got PDP 900 series boom/straight stands by DW, from musiciansfriend.com for 49.99 which was a price match from samash.com. That is a great deal!!!
_________________ Dream Big, Live the Life
Kyle
|
| |
Tue Feb 20, 2007 4:51 am |
 |
SabianLudwigZildjianDW

drumming adept
Posts: 88
Joined: 04 Feb 2007
Location: San Diego, California
|
DW Hardware all the way but Tama is about the same.
|
| |
Mon Mar 05, 2007 3:43 pm |
 |
|
|
|
|
|
|
|
|